FAQ

No, you can reuse pool table felt as many times as you want as long as you’re happy with the current quality of the felt.

It can take anywhere from an hour to two hours to disassemble a pool table depending on the size, make, and model of your pool table.

The number of slate pieces depends on the type of table you own. Most home tables come with three pieces of slate and bar/coin op tables, as well as diamond tables have 1 piece of slate.

On average it takes from 2 to 3 hours to properly assemble and install a new table. The process includes building the cabinet, leveling the slate, and putting the felt on the rails and the bed of the table.

It takes two professional pool table installers to move a table.

Once a table is properly leveled by a professional, it will not need to be re-leveled again unless being taken apart to be moved or re-felted.

The average life of felt on a pool table is 2 to 3 years. Factors such as, how often the table is played on as well as quality of felt will determine if the felt is needed to be changed more often. For example, a coin op table in a pool hall will need to be changed every year due to the constant amount of play.

No, it is recommended that you use a professional pool table installer to disassemble your pool table and relocate it to a new location.

The normal life of rubber on pool table rails is 10 to 15 years, however recently there has been a decline in quality and rubber is needing to be changed between 3 and 5 years.

It takes on average between 2 and 3 hours to remove all old rubber and replace with new
rubber.

Standard pool table height is between 29.25″ – 31″ from the floor.

Have A Question?